高压下聚苯胺的结构和电性能研究

 以金刚石压腔高压装置为工具，用Ⅱ型金刚石作压砧兼红外窗口，对本征态聚苯胺进行了高压（0~8.4 GPa）就位红外光谱测试。结果表明：在4.8~5.2 GPa压力区间，代表醌环振动的吸收峰相对代表苯环振动的吸收峰变小，表明聚苯胺在此压力区间结构上发生了显著变化，且这种变化是不可逆的。聚苯胺的高压（0~14.5 GPa）电阻测量结果表明：当压力小于7.5 GPa时，电阻随压力升高而显著降低，据此认为聚苯胺为电子性导电物质；在7.5 GPa处电阻出现极小值，然后又缓慢升高，至10 GPa后基本不变。推测聚苯胺电阻极小值是由结构变化引起的。至于红外光谱与电阻测量结果反映聚苯胺结构变化的压力值不一致，可能是由于测试条件不同所致。     

一种可实时化的多光谱图像融合系统

在多光谱摄影和光电成像技术基础上，本文提出了一种可实时化的多光谱图像融合系统。与多光谱摄影相比，不仅可实现多光谱实时化摄像，而且光谱响应进一步向近红外延伸，并引入图像处理技术。实验表明：这种技术对于增加系统的识别能力具有明显的作用，可进一步构成不同用途的新型多光谱图像融合系统。     

饲喂频率对鲈鱼生长及体生化成分的影响

选取同一种饵料设置1次·d-1、2次·d-1、3次·d-1、4次·d-14个饲喂频率,采用静水连续充气养殖系统,在盐度为26.0%～27.0%、温度为26～30℃条件下对鲈鱼(85.95±2.04)g进行为期40d的生长实验.结果表明:(1)饲喂频率影响鲈鱼的生长是由食物转化率和摄食率的提高共同引起的.(2)水分含量随饲喂频率的增高而保持不变;蛋白质含量随饲喂频率的增加,基本保持不变;脂肪含量随饲喂频率的增高而明显减少;灰分含量随饲喂频率的增多而明显增加.(3)鲈鱼的适宜饲喂频率为2次·d-1.     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Benson真有效意义下集值优化的广义最优性条件

本文引入了关于集值映射的α-阶Clarke切导数、α-阶邻接切导数及α-阶 伴随切导数的概念,借此建立了约束向量集值优化Benson真有效解导数型的Kuhn- Tucker条件.     

绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

PHOTOIONIZATION IN AN INTENSE LASER FIELD

In this paper classical approaches are used to study the detailed processes of photoion-ization in an intense laser field. The analytic expression of the ionization rate is derived. Finally, the results obtained are compared with existing theories such as Landau's tunnel theory and Keldysh-Faisal-Reiss theory.     

KNSBN晶体猫式互抽动相位共轭光特性

在KNSBN：Ce晶体中，利用二波耦合作用，在单一光束无法获得相位共轭光的条件下，实现了“猫”式互抽运相位共轭光输出，获得较高的共轭光发射率，实验结果表明，晶体的二波耦合作用可以使晶体的自抽运相位共轭光的阈值光强降低。入射光的入射角范围增大，响应时间缩短。     

Feature Selection using Fuzzy Support Vector Machines

The feature selection consists of obtaining a subset of these features to optimally realize the task without the irrelevant ones. Since it can provide faster and cost-effective learning machines and also improve the prediction performance of the predictors, it is a crucial step in machine learning. The feature selection methods using support machines have obtained satisfactory results, but the noises and outliers often reduce the performance. In this paper, we propose a feature selection approach using fuzzy support vector machines and compare it with the previous work, the results of experiments on the UCI data sets show that feature selection using fuzzy SVM obtains better results than using SVM.